SmartPlan/Doc/Plan_Data.json

[
  {
    "sceneNo": "a",
    "sceneName": "1000KV变电站 1#主变旁电缆沟失火，出现明火，火情2分钟内（小火）",
    "temperature1": 56,
    "temperature2": 60,
    "InfraredAlarm": 1,
    "gas": 1.8,
    "smoke": 34,
    "plans": [
      {
        "plan_no": "a1_p1",
        "plan_short_name": "指挥手动灭火",
        "plan_category": "1",
        "plan_params": "快速响应,灭火",
        "plan_goal": "快速响应,灭火",
        "plan_command": "指挥处置小火灭火方案",
        "plan_desc": "1.值班长通知现场巡检前往起火处; 2.现场巡检前往现场确认火灾规模并上报值班长等待下一步指令; 3.值班长确认火灾现场规模为小型火灾;4.启动自动灭火; 5.自动灭火装置失效,切换手动启动",
        "next_scene_no": "b",
        "plan_img": "a.png"
      }
    ],
    "scene_img": "scene_a1.png",
    "plan_img": "a.png",
    "scene_desc": "电气线路通常敷设在隐蔽处，如电缆沟内。电缆线路自身具有易燃性，加之线路老化，电线的导体电阻会变大, 电缆处于高温下运行，促使电缆本身绝缘层老化加剧，导致绝缘击穿，出现明火",
    "scene_type": 0
  },
  {
    "sceneNo": "b",
    "sceneName": "1000KV变电站1#主变旁电缆沟火势加大,火情5分钟内(中火)",
    "temperature1": 160,
    "temperature2": 120,
    "InfraredAlarm": 1,
    "gas": 3.45,
    "smoke": 80,
    "plans": [
      {
        "plan_no": "b_p1",
        "plan_short_name": "指挥处置:设备灭火,中火灭火 ",
        "plan_category": "1",
        "plan_params": "上报情况，灭火",
        "plan_goal": "快速响应,灭火",
        "plan_command": "指挥处置中火灭火操作方案",
        "plan_desc": "指挥处置中火灭火操作方案",
        "next_scene_no": "c",
        "children": [
          {
            "plan_no": "b_p1_1",
            "plan_short_name": "指挥处置:设备灭火,中火灭火 操作方案一",
            "plan_category": "1",
            "plan_params": "上报情况，灭火",
            "plan_goal": "快速响应,灭火",
            "plan_command": "指挥处置中火灭火操作方案一",
            "plan_desc": "方案1：指挥处置：1、值班长前往现场协助；2、现场人员听从指挥，打开机械应急阀灭火",
            "next_scene_no": "c",
            "plan_img": "b1.png"
          },
          {
            "plan_no": "b_p1_2",
            "plan_short_name": "指挥处置:设备灭火,中火灭火 操作方案二",
            "plan_category": "1",
            "plan_params": "上报情况，灭火",
            "plan_goal": "快速响应,灭火",
            "plan_command": "指挥处置中火灭火操作方案二",
            "plan_desc": "方案2：指挥处置 ：1、拨打119，指挥巡检人员； 2、听从安排前往现场协助 ；3、现场人员听从指挥，打开机械应急阀灭火",
            "next_scene_no": "c",
            "plan_img": "b1.png"
          }
        ]
      }
    ],
    "scene_img": "scene_b.png",
    "plan_img": "b.png",
    "scene_desc": "未及时采取有效措施，导致火势顺着电缆线蔓延，温度进一步升高，致使其他地方的电缆绝缘材料熔化，引发中火",
    "scene_type": 0
  },
  {
    "sceneNo": "c",
    "sceneName": "1000KV变电站 1#主变旁电缆沟火势失控,即将影响1#主变正常工作,火情10分钟后（大火）",
    "temperature1": 200,
    "temperature2": 200,
    "InfraredAlarm": 1,
    "gas": 5.45,
    "smoke": 200,
    "plans": [
      {
        "plan_no": "c_p1",
        "plan_short_name": "指挥处置:只灭火不倒负荷→向消防队请求救援;消防队救援",
        "plan_category": "1",
        "plan_params": "灭火 确保供电 保护1#主变安全",
        "plan_goal": "灭火 确保供电 保护1#主变安全",
        "plan_command": "启动大火灭火 操作方案三",
        "plan_desc": " 指挥处置:1.只灭火不倒负荷  2.同时向消防队请求救援",
        "next_scene_no": "f",
        "plan_img": "c1.png"
      },
      {
        "plan_no": "c_p2",
        "plan_short_name": "指挥处置: 只倒负荷不灭火→向调度申请倒负荷操作 ",
        "plan_category": "1",
        "plan_params": "",
        "plan_goal": "确保正常供电 保护1#主变",
        "plan_command": "指挥处置:1.上报调度及各级领导 需要进行倒负荷操作;2.对出现火情的设备进行断电，并做好防火隔断 3.向周边物资抢修队及消防队请求援助",
        "plan_desc": " 转移负荷操作方案：1#主变失火，1#主变及三侧断路器由运行状态转为检修状态，需要将1#主变全部负荷转移至2#主变。",
        "next_scene_no": "g",
        "children": [
          {
            "plan_no": "c_p2_1",
            "plan_short_name": "指挥处置: 只倒负荷不灭火→向调度申请倒负荷操作 处置方案:转移负荷操作一 ",
            "plan_category": "1",
            "plan_params": "",
            "plan_goal": "确保正常供电 保护1#主变",
            "plan_command": "指挥处置:1.上报调度及各级领导 需要进行倒负荷操作;2.对出现火情的设备进行断电，并做好防火隔断 3.向周边物资抢修队及消防队请求援助",
            "plan_desc": " 转移负荷操作方案一：1#主变失火，1#主变及三侧断路器由运行状态转为检修状态，需要将1#主变全部负荷转移至2#主变。",
            "next_scene_no": "g",
            "plan_img": "c1.png"
          },
          {
            "plan_no": "c_p2_2",
            "plan_short_name": "指挥处置: 只倒负荷不灭火→向调度申请倒负荷操作 处置方案:转移负荷操作二 ",
            "plan_category": "1",
            "plan_params": "",
            "plan_goal": "确保正常供电 保护1#主变",
            "plan_command": "指挥处置:1.上报调度及各级领导 需要进行倒负荷操作;2.对出现火情的设备进行断电，并做好防火隔断 3.向周边物资抢修队及消防队请求援助",
            "plan_desc": " 转移负荷操作方案二：1#主变失火，1#主变及三侧断路器由运行状态转为检修状态，需要将1#主变全部负荷转移至2#主变。 ",
            "next_scene_no": "g",
            "plan_img": "c1.png"
          },
          {
            "plan_no": "c_p2_3",
            "plan_short_name": "指挥处置: 只倒负荷不灭火→向调度申请倒负荷操作 处置方案:转移负荷操作三 ",
            "plan_category": "1",
            "plan_params": "",
            "plan_goal": "确保正常供电 保护1#主变",
            "plan_command": "指挥处置:1.上报调度及各级领导 需要进行倒负荷操作;2.对出现火情的设备进行断电，并做好防火隔断 3.向周边物资抢修队及消防队请求援助",
            "plan_desc": "转移负荷操作方案三：1#主变失火，1#主变及三侧断路器由运行状态转为检修状态，需要将1#主变全部负荷转移至2#主变。 ",
            "next_scene_no": "h",
            "plan_img": "c1.png"
          }
        ]
      },
      {
        "plan_no": "c_p3",
        "plan_short_name": "指挥处置：“倒负荷 + 灭火”→同时向消防队请求支援，向调度申请倒负荷操作 ",
        "plan_category": "1",
        "plan_params": "",
        "plan_goal": "确保正常供电 保护1#主变",
        "plan_command": "指挥处置 ： 1、上报调度及各级领导 需要进行倒负荷操作；2、确保出现火情的设备断电后，打开喷水枪进行灭火， 3.向周边物资抢修队及消防队请求援助 ",
        "plan_desc": "指挥处置:转移负荷操作方案：1#主变失火，1#主变及三侧断路器由运行状态转为检修状态，需要将1#主变全部负荷转移至2#主变。 同时向周边物资抢修队及消防队请求援助 ",
        "next_scene_no": "h",
        "children": [
          {
            "plan_no": "c_p3_1",
            "plan_short_name": "  指挥处置：“倒负荷 + 灭火”→同时向消防队请求支援，向调度申请倒负荷操作 转移负荷操作一，同时灭火",
            "plan_category": "1",
            "plan_params": "灭火，保住1#主变，确保正常供电",
            "plan_goal": "灭火，保住1#主变，确保正常供电",
            "plan_command": "指挥处置 ： 1、上报调度及各级领导 需要进行倒负荷操作；2、确保出现火情的设备断电后，打开喷水枪进行灭火， 3.向周边物资抢修队及消防队请求援助 ",
            "plan_desc": "指挥处置:转移负荷操作方案一：1#主变失火，1#主变及三侧断路器由运行状态转为检修状态，需要将1#主变全部负荷转移至2#主变。 同时向周边物资抢修队及消防队请求援助",
            "next_scene_no": "h",
            "plan_img": "c1.png"
          },
          {
            "plan_no": "c_p3_2",
            "plan_short_name": "  指挥处置：“倒负荷 + 灭火”→同时向消防队请求支援，向调度申请倒负荷操作 转移负荷操作一，同时灭火",
            "plan_category": "1",
            "plan_params": "灭火，保住1#主变，确保正常供电",
            "plan_goal": "灭火，保住1#主变，确保正常供电",
            "plan_command": "指挥处置 ： 1、上报调度及各级领导 需要进行倒负荷操作；2、确保出现火情的设备断电后，打开喷水枪进行灭火， 3.向周边物资抢修队及消防队请求援助 ",
            "plan_desc": "指挥处置:转移负荷操作方案二：1#主变失火，1#主变及三侧断路器由运行状态转为检修状态，需要将1#主变全部负荷转移至2#主变。 同时向周边物资抢修队及消防队请求援助",
            "next_scene_no": "d",
            "plan_img": "c1.png"
          },
          {
            "plan_no": "c_p3_3",
            "plan_short_name": "  指挥处置：“倒负荷 + 灭火”→同时向消防队请求支援，向调度申请倒负荷操作 转移负荷操作一，同时灭火",
            "plan_category": "1",
            "plan_params": "灭火，保住1#主变，确保正常供电",
            "plan_goal": "灭火，保住1#主变，确保正常供电",
            "plan_command": "指挥处置 ： 1、上报调度及各级领导 需要进行倒负荷操作；2、确保出现火情的设备断电后，打开喷水枪进行灭火， 3.向周边物资抢修队及消防队请求援助 ",
            "plan_desc": "指挥处置:转移负荷操作方案三：1#主变失火，1#主变及三侧断路器由运行状态转为检修状态，需要将1#主变全部负荷转移至2#主变。 同时向周边物资抢修队及消防队请求援助",
            "next_scene_no": "g",
            "plan_img": "c1.png"
          }
        ]
      }
    ],

    "scene_img": "scene_c.png",
    "plan_img": "c.png",
    "scene_desc": "随着时间的流逝，火势进一步加大，从电缆沟处蔓延至1#主变，造成箱体内变压器线圈发热，起火，引起1#主变着火。",
    "scene_type": 0
  },
  {
    "sceneNo": "d",
    "sceneName": "灭火成功，供电不受影响,1#主变无损伤",
    "temperature1": 79.4,
    "temperature2": 72.3,
    "InfraredAlarm": 0,
    "gas": 38,
    "smoke": 68,
    "plans": [

    ],

    "scene_img": "scene_d.png",
    "scene_desc": "及时采取有效措施，将着火部分控制在电缆沟中，未蔓延到1#主变，主变无损伤，供电不受影响。",
    "scene_type": 1
  },
  {
    "sceneNo": "e",
    "sceneName": "灭火成功,单1#主变断电",
    "temperature1": 20,
    "temperature2": 20,
    "InfraredAlarm": 0,
    "gas": 1.2,
    "smoke": 40,
    "plans": [

    ],

    "scene_img": "scene_e.png",
    "scene_desc": "火势顺着电缆线蔓延，致使其他地方的电缆绝缘材料熔化起火，影响1#主变正常供电，虽最终灭火，但1#主变电缆不能正常使用，导致1#主变断电",
    "scene_type": 2
  },
  {
    "sceneNo": "f",
    "sceneName": "灭火失败,火势持续，单1#主变断电",
    "temperature1": 79.4,
    "temperature2": 72.3,
    "InfraredAlarm": 1,
    "gas": 38,
    "smoke": 68,
    "plans": [

    ],
    "scene_img": "scene_f.png",
    "scene_desc": "火势进一步加大，1#主变处火势加大。",
    "scene_type": 3
  },
  {
    "sceneNo": "g",
    "sceneName": "已灭火， 1#主变损伤轻微，断电抢修后即可恢复",
    "temperature1": 20,
    "temperature2": 20,
    "InfraredAlarm": 0,
    "gas": 1.2,
    "smoke": 40,
    "plans": [

    ],

    "scene_img": "scene_g.png",
    "scene_desc": "火势烧到变压器，虽及时灭火，但1#主变部分被烧毁，需要进行抢修。",
    "scene_type": 3
  },
  {
    "sceneNo": "h",
    "sceneName": "灭火延迟/失败，火势失控， 1#主变烧毁",
    "temperature1": 79.4,
    "temperature2": 72.3,
    "InfraredAlarm": 1,
    "gas": 38,
    "smoke": 68,
    "plans": [

    ],
    "scene_img": "scene_h.png",
    "scene_desc": "火势失控，1#主变完全浸没在火海中，完全烧毁",
    "scene_type": 3
  }
]